RD982i
Powerful DMR repeater for small radio networks
The Hytera RD982i digital repeater is the heart of a multi-site conventional analog or digital radio network. Offering innovative design and reliability, this repeater delivers excellent coverage with up to 50 Watts power.
Need to connect multiple sites? Ask about Hytera's IP Site Connect software.
Owner's Manual:
Hytera RD982i RD982i-S RD982i-S 100 W Digital Repeater Owners Manual
Highlights
Comprehensive Network
All Hytera repeaters can be connected in digital mode via IP connection for multi-site requirements. Both in conventional analog and DMR modes (DMR Tier II), the RD982S repeater can be used with the RD622 and RD962 repeaters to create an impressive network
Flexible Installation
The RD982i can be installed in a 19-inch equipment rack or a work table
Maximize Capacity
Thanks to the TDMA technology, twice as many users can use the same channel. With frequency scarcity, this represents an important relief and reduces the expense of system subscribers and licenses
Professional Design
Integrated LEDs complement the sleek repeater design, while the integrated fan assembly provides high cooling capacity. Created with an intuitive interface, clear menus and the large navigation controller ensure it's simple to use
Secure Communication
Offering advanced digital encryption function, the RD982 can switch independently between digital and analog modes, yet always ensuring the signal is protected
Functions
Mixed Mode Operation
This feature allows the device to automatically detect and switch between analogue and digital modes based on the signal received.
IP Site Connect
Create and control your network using IP (internet protocol) site connect.
DIGITAL ENCRYPTION
40 bit enhanced encryption as standard with the latest firmware, ensuring your transmissions are secure.
PSEUDO TRUNKING
Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.
ACCESSORY CONNECTOR
Port to connect a multitude of audio accessory options, improving the user operating experience in different environments.
Accessories for RD982i
Included as standard with RD982i
Installation
Programming
Audio
Charger & Power
Technical Specifications
General
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz UHF2: 450-520MHz UHF3: 350-400MHz
- Channel Capacity
- 16
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- DC +13.6v ± 15%
- Battery Backup
- YES via PSU
- Integral Battery Charging
- YES via PSU
- Dimensions(W×H×D)
- 3.46" X 19" X 14.4", 88 x 483 x 366 (mm)
- Weight
- 18.73 lbs, 8.5Kg
- Display
- 2.0'' 4 rows 160*128 pixels 262200 colors
- Programmable Buttons
- 4
- TX Aerial Connector
- N-type socket
- RX Aerial Connector
- N-type socket
- Internal Duplexer
- YES using optional mounting kit
Environmental Specifications
- Dust & Water Intrusion
- IP54 Standard
Features
- 19" Rack Mounting
- YES (2U required)
- Back Pack
- NO
- Multiple CTCSS/ CDCSS
- YES
- Repeater Knockdown
- YES (Analog & Digital)
- IP Ports
- 1
- GPS
- NO
- Telemetry
- YES
- Audio Output for Slot A & B
- YES
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- NO
- Lone Worker
- NO
- Mandown
- NO
- Priority Scan
- YES
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128-bit and 256-bit AES) available via chargeable license file.
- Multiple Key Encryption Decode
- YES
- Multilanguage Menu
- YES
- Power on & off user logo programming
- YES
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- NO
- Tier 3 Trunking
- NO
- Single Site XPT
- NO
- Multi-Site XPT
- NO
- Number of Sites
- NO
- Over-the-Air Programming
- NO
- Analog Only Version
- Not Available