Find a Dealer

DMR Tier III Trunking

Digital Radio Trunking Systems

Hytera DMR Tier 3 Radio Trunking Systems

DMR

Trunked Radio systems optimize voice or data traffic through a limited number of frequencies, maximizing the available resources for a large group of users.  DMR Tier III Trunked Radio utilizes repeater technology with a dedicated control channel, managed by a server. 

The Hytera DMR Tier III Trunking has been developed using the ETSI DMR open standard.  It is an IP-based Digital Trunking System designed to provide voice, dispatch, and radio management capabilities across wide geographic areas.

DMR Tier III provides a dedicated FCC FB8 frequency control channel for radios to register and request service from the network. The remaining channels in the system are allocated to the radio as they are needed and are therefore a shared or “trunked” resource called a “traffic channel”.  As soon as a traffic channel is available, a user will be assigned to use the channel, without having to wait for a specific channel to become available.

The Hytera DMR Tier III Trunking solution consists of a central controller called a Mobile Switching Office (MSO), a Base Station Controller Unit (BSCU) at each radio site, multiple repeaters to carry the traffic, and a wide area network that connects all the different pieces together.  IP connectivity is provided by a variety of third-party internet, LAN, or VPN network operators.

The Hytera DMR Tier III system also supports SmartOne, a comprehensive dispatching and unified radio software platform, and the Multimedia Recording and Playback System (MRPS) call logging, recording, and replay system.

Learn more about the different DMR Tiers.

DS6210 DMR Tier III System

The DS6210 DMR Tier III Pro has blade architecture for easy installation and system scalability.  It accommodates redundant controllers and power supplies in the same cabinet for immediate fail-over in the unlikely event of a blade card failure.  The system is supplied in fully configured cabinets ready for final site installation.

The DS6210 DMR Tier III Pro repeater site channels have triple receive diversity to enhance the uplink receive signal for all field radios, and improves the uplink reliability for portable radios at the edge of coverage.

DMR Two-Way Radio White Papers

The benefits of Migrating from Analog to DMR Technology,
and Increasing Range and Capacity with DMR Radio Systems.

Key DMR Tier III Trunking System Benefits

Dedicated Management Channel

DMR Tier III trunking increases efficiency of channel usage with large groups of radios users using a dedicated control channel, managed by a server. This allows for maximizing channel frequency resources for high-volume call traffic and multiple user Talkgroups.

System Security

Some applications require a higher level of security for accessing the network, for those we offer ESN check (electronic serial number), authentication (both device and mutual), stun/revive (for a misplaced unit to still be able to be tracked), kill (completely disabling a stolen unit) and encryption.

Radio Management and Calling Features

The Hytera DMR Tier III System offers a multitude of different management services to allow radios to interact with the network. Radios are registered on the network for identification and can be configured with subscriber area restrictions and control channel reselection.
Two-Way DMR radios on a DMR Tier III system support voice and data services. The system provides standard voice services such as individual or private calls, group, emergency, broadcast, all call (this is a system wide call to everyone on the network), dispatcher, and and telephone calls. Data services include text messages, GPS data, status message (pre-configured messages), and emergency alarms. Additional radio features support on DMR Tier III systems include late entry into a group call, ambience listening, interrupt/override, dynamic group number assignment, voice recording, remote monitor, OTAP (Over the Air Programming), vote now, and group patching.

Mission Critical Redundancy

The system has several redundancy mechanisms available to ensure trouble-free operation and service to the end user. Considering that the MSO is the heart of the system, it supports local and geographical redundancy mechanisms to ensure continuous wide area operation. Other controller hardware can also be used in redundant configurations with several failsafe modes. All these configurations are scalable and can be adjusted at any time during the lifecycle of the system. So, you can start small and add redundancy as your system grows.

System Interoperability

Third party integrators can use the standard DMR AIS interface and the Hytera API for integrating dispatchers, vehicle location tracking systems and billing systems.

Contact an Authorized Hytera Dealer

Hytera is the industry leader in fully DMR standards compliant trunking systems.  Our professional systems engineers work with authorized Hytera US Inc Dealers to deliver reliable and cost-effective DMR Tier III Trunking Systems.

Discover the benefits of DMR Trunking and Contact Hytera or Find a Dealer today.

We’re Here To Help

Call a live person during business hours, email us, or complete the form on the right and we will provide the information you need.

(954) 846-1011

"*" indicates required fields

This field is for validation purposes and should be left unchanged.