RD622i
Highlights
Compact Design
The RD622i combines transmitter and receiver components, the voltage supply and the duplexer (optional) in its sleek chassis to provide a complete solution
Analog or Digital
The RD622i repeater can automatically change between digital and analog mode depending on the type of receiver signal, saving both time and money by eliminating the need to configure frequencies and channels manually
Flexible Networking
Connect the RD622i to an IP-based communication network to service multiple locations. The roaming function is used to provide radios in this network with voice and data services across cells (base stations)
Easy Installation
Its well-engineered design makes wall mounting very simple using the optional wall bracket. This makes it flexible to install while improving convenience and discretion in buildings
Fail-safe Communication
Provide a fail-safe radio signal by connecting the repeater to a 12v battery in addition to the normal supply of power. If the AC supply fails, the RD622 automatically switches to battery backup
Functions
Mixed Mode Operation
This feature enables the device to automatically detect and switch between analog and digital modes based on the signal received.
IP Site Connect
Create and control your network using IP (internet protocol) site connect.
DIGITAL ENCRYPTION
40 bit Enhanced Encryption as Standard on the latest firmware version, ensuring your transmissions are always secure
PSEUDO TRUNKING
Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to other repeaters.
WALL MOUNTING
Simple, flexible installation utilising the specially designed wall mounting bracket.
PRIORITY SCAN
Automatically scans and switches transmission to receive and deliver a priority call.
Accessories for RD622i
Included as standard with RD622i
Systems that work with RD622i
DMR Applications
Technical Specifications
General
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz
- Channel Capacity
- 16
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- AC 90 to 264v DC +13.6v ± 15%
- Battery Backup
- YES
- Integral Battery Charging
- YES
- Dimensions (W×H×D)
- 13" X 8.25" X 4", 330 X 209.55 X 102 (mm)
- Weight
- 11.02 lbs, 5.0Kg with duplexer
- Display
- NO
- Programmable Buttons
- TX Aerial Connector
- N-type socket
- RX Aerial Connector
- N-type socket
- Internal Duplexer
- YES using optional mounting kit
Environmental Specifications
- Dust & Water Intrusion
- IP54 Standard
Features
- 19" Rack Mounting
- NO
- Back Pack
- NO
- Multiple CTCSS/ CDCSS
- YES
- Repeater Knockdown
- YES (Analog & Digital)
- IP Ports
- 1
- GPS
- NO
- Telemetry
- YES
- Audio Output for Slot A & B
- YES
- Remote Programming
- YES via IP interface
- Remote Diagnostic & Control
- Software available
- Emergency Mode
- NO
- Lone Worker
- NO
- Mandown
- NO
- Priority Scan
- YES
- Digital Encryption
- Advanced encryption (Hytera or DMRA 128-bit and 256-bit AES) available via chargeable license file.
- Multiple Key Encryption Decode
- YES
- Multilanguage Menu
- NO
- Power on & off user logo programming
- NO
- Voice Interrupt
- Yes (latest firmware required and Smart Dispatch V4.5.6 or above)
- Text Messaging
- Yes via application software
- Quick Text Messages
- Up to 25 pre-programmed via CPS (for telemetry use)
- MPT1327 / 1343 Trunking
- NO
- Tier 3 Trunking
- NO
- Single Site XPT
- NO
- Multi-Site XPT
- NO
- Number of Sites
- NO
- Over-the-Air Programming
- NO
- Analog Only Version
- Not Available