PD412i

Portable | DMR Radios and Repeaters

Highlights

diagram indicating highlights of PD412i

Operational Efficiency with RFID

The data auto-transmission feature enables the PD412i and Hytera Patrol System to control asset management or radio tagging and allocation

Clear Communication

Thanks to the latest audio processing technology and in-built speaker, the PD412i offers you outstanding audio quality

Analog or Digital

Detects either signal and automatically switches between modes to receive on a single channel

Instant Messaging

Supports pre-programmed messaging to individuals or groups

Long Battery Life

Operating time of approximately 16 hours in digital mode

Functions

Created with Sketch. ERGONOMIC AND EASY TO USE

Tactile buttons for no-look PTT and emergency calling

Created with Sketch. HIGH-QUALITY AUDIO

Audio equalizer adjusts low, mid, and high frequency gain. Provides high-quality digital audio performance with loud and clear private calling, group calling, and all call

Created with Sketch. LONG-LIFE BATTERY

Powerful Li-Ion 1500mAh battery Delivers up to 16 hours of operation in digital mode and 12 hours in analog mode

Created with Sketch. RELIABLE AND DURABLE

IP54 rated for water and dust ingress, and compliant with MIL-STD-810-G for impact strength and durability

Created with Sketch. EMERGENCY ALARM

Emergency Alarms can be sent to other radios via the one touch programmable button

Created with Sketch. ANALOG & DIGITAL AUTO DETECT

Simultaneously monitors analog and digital modes and automatically responds in each mode

Created with Sketch. PRE-PROGRAMMED TEXT MESSAGING

One-touch sending of pre-programmed text messages. Stores up to ten pre-defined text messages

Created with Sketch. VOX

Voice activated communications (VOX) activates the microphone by speaking to enable hands-free operation

PD41 X 11 170210 105102

Created with Sketch. ROAMING

Allows radios to seamlessly move between connected repeaters with uninterrupted voice transmission

Created with Sketch. PSEUDO TRUNK

This virtual trunking feature automatically uses whichever digital timeslot is free to improve call connectivity and frequency efficiency

Created with Sketch. RADIO REGISTRATION SERVICE

RRS allows the PD412i to communicate with dispatch and unified communications applications

Upgrade Features (Optional)

Created with Sketch. ENCRYPTION

Encryption for secure audio and data

Created with Sketch. PRIORITY INTERRUPT

Priority Interrupt allows dispatcher to interrupt existing calls with important emergency information

Created with Sketch. REMOTE MONITOR

Remote Monitor allows dispatcher to key the PTT button and listen in an emergency situation

Created with Sketch. STUN/REVIVE

Stun/Revive enables dispatch and other users to disable/enable a radio if it is stolen, lost, or used maliciously

Accessories for PD412i

Included as standard with PD412i Included as standard with PD412i

Antenna

Carrying

Battery

Installation

Charger & Power

Audio

Other

Technical Specifications

General

Frequency Range
UHF 400-470MHz, 450-520MHz VHF 136-174MHz
Channel Capacity
256 Channels (128 Analog, 128 Digital)
Zone Capacity
3 Zones with 16 Channels per Zone
Channel Spacing
25/12.5kHz
Operational Voltage
7.4W
Battery
1500mAh (Li-Ion) Standard, 2000mAh Optional
Battery Life (5/5/90)
1500mAh: 16 hours Digital, 12 hours Analog 2000mAh: 22 hours Digital, 16 hours Analog
Weight
9.8oz (280g)
Dimensions
4 13/32” x 2 11/16” x 1 7/32” (112 x 55 x 31mm)
Frequency Stability
± 0.5ppm
Antenna Impedance
50Ω

Receiver

Digital Sensitivity
0.22µV (BER 5%)
Analog Sensitivity
0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD) 0.22µV (12dB SINAD)
Adjacent Selectivity
TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz
Spurious Response Rejection
TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz
Intermodulation
TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz
Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
≤3%
Audio Response
+1 to -3dB
Conducted Spurious Emission
<-57dBm

Transmitter

RF Power Output
VHF High Power: 5W VHF Low Power: 1W UHF High Power: 4W UHF Low Power: 1W
FM Modulation
11K0F3E @ 12.5kHz 16K0F3E @ 25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm <1GHz, -30dBm >1GHz
Modulation Limiting
±2.5kHz @ 12.5kHz ±5.0kHz @ 25kHz
FM Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Adjacent Channel Power
60dB @ 12.5kHz, 70dB @ 25kHz
Audio Response
+1 to -3dB
Audio Distortion
≤3%
Digital Vocoder Type
AMBE++
Digital Protocol
ETSI-TS102 361-1,-2,-3

Environmental

Operating Temperature
-22oF to +140oF (-30oC to +60oC)
Storage Temperature
-40oF to +185oF (-40oC to +85oC)
ESD
IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air
Dust and Water Ingress
IP54 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock and Vibration
Per MIL-STD-810 C/D/E/F/G Standard