BD5 Series

Portable | DMR

Highlights

diagram indicating highlights of BD5 Series

Antenna

Enhance signal receiving ability.

Speaker and Microphone

Provide clear receive and transmit audio.

LED indicator

Show the radio receiving and transmitting status as green light and red light.

Channel knob

Supports 16 channels to be changed very easily.

Functions

Created with Sketch. RUGGED AND RELIABLE

BD502/BD552 is designed and tested to meet Military Standards 810 C, D, E, F and G, including temperature shock, vibration, high & low temperature and humidity. IP54 dust- and water-proof design guarantees the reliability in different environments. And based on TDMA technology, the radio can work longer, up to 22 hours in digital mode.

Created with Sketch. CLEAR VOICE

With digital encoding and correction technology, human voice is transmitted much clearer without background noise, even from great distances.This is the next generation audio quality experience.

Created with Sketch. ANALOG & DIGITAL DUAL MODES

BD502/BD552 can support both analog and digital modes on the same hardware. You can easily switch between two operation modes and it helps you to communicate with analog radios.

Created with Sketch. LONG WORKING TIME

Based on TDMA technology, BD502 in digital mode can work as long as 16 hours @ 1500mAh or 22 hours @2000mAh in 5-5-90 mode.

Bd50 X

Accessories for BD5 Series

Included as standard with BD5 Series Included as standard with BD5 Series

Systems that work with BD5 Series

Technical Specifications

General data

Frequency range
UHF: 400-470 MHz VHF: 146-174 MHz
Channel capacity
48
Zone capacity
3
Channel spacing
25/12.5KHz
Operating voltage
3.7 V
Battery
1500Ah (Li-Ion) 2000Ah (Li-Ion)
Battery service life (5/5/90)
Analog: 12/16 hours (1500mAh) Digital:16/22 hours (2000mAh)
Frequency stability
±0.5 ppm
Antenna impedance
50 Ω
Dimensions (H×W×D)
4.25" x 2.12" x 1.14", 108×54×29mm
Weight
8 oz. (with AN0435W09 and BL1506)
Display
BD502 has no display, BD552 has single line display

Transmitter

RF Power Output
VHF High power: 5W VHF Low power: 1W UHF High power: 4W UHF Low power: 1W
FM Modulation
11K0F3E @ 12.5KHz 16K0F3E @ 25KHz
4FSK Digital Modulation (Digital Emissions Designator)
12.5 kHz (data only): 7K60FXD 12.5 kHz (voice & data): 7K60FXW
Conducted/Radiated Emission
-36 dBm < 1 GHz -30 dBm > 1 GHz
Modulation limiting
±2.5 kHz at 12.5 kHz ±5.0 kHz at 25 kHz
FM Hum & Noise
40 dB at 12.5 kHz 45 dB at 25 kHz
Adjacent channel selectivity
60 dB at 12.5 kHz 70 dB at 25 kHz
Audio Response
+1 ~ -3dB
Audio Distortion
≤ 3%
Digital vocoder type
AMBE++

Receiver

Sensitivity (Digital)
0.22μV / BER 5%
Sensitivity (digital)
0.22μV (Typical) (12dB SIN AD) 0.4μV (20dB SIN AD)
Adjacent channel selectivityTIA-603
60dB @ 12.5KHz/70dB @ 25KHz
IntermodulationTIA-603
65dB @ 12.5/25KHz
Spurious response rejectionTIA-603
70dB @ 12.5/25KHz
Hum & Noise
40dB @ 12.5KHz 45dB @ 25KHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
≤3%
Audio Response
+1 ~ -3dB
Conducted spurious emission
< -57 dBm

Environmental Specs

Operating temperature
-30 °C to +60 °C
Storage temperature
-40 °C to +85 °C
LED
IEC 61000-4-2 (level 4) ±8 kV (contact ) ±15 kV (air)
Dustproof & Waterproof
IP54 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock & Vibration
Per MIL-STD-810 C/D/E/F/G Standard